10.50.016U Final plat – Requirements.
Each final plat submitted for approval shall be drawn at a scale of one inch equals one hundred feet or larger, shall be eighteen inches by twenty-four inches in size, and shall contain the following information on the face of the plat or on additional sheets if approved by the administrator:
(1) Date, north arrow and scale.
(2) Name of the subdivision.
(3) Accurate and complete legal description of the subdivision on the face of the final plat.
(4) A complete survey of the section or sections in which the plat or replat is located, or as much thereof as may be necessary to properly orient the plat within such section or sections.
(5) Boundary lines of the subdivision; of the proposed lots therein; of the rights-of-way for any streets, highways, roads, easements or other uses; and of any associated dedications; all to be indicated by accurate dimensions, bearing or deflection angles, and radii, arcs, and central angles of all curves.
(6) Notation and description of any protective improvements or dedications required by the city council or otherwise provided.
(7) Reference to any recorded subdivision or short subdivision adjoining the subdivision.
(8) Name and right-of-way width of each street or other right-of-way.
(9) Location, dimensions, and purpose of any easements.
(10) Number to identify each lot and block.
(11) Addresses for each lot within the plat.
(12) Purpose for which sites, other than residential lots, are dedicated or reserved.
(13) Certificate by the professional surveyor certifying to the accuracy of the survey and plat in substantially the following form:
I, ________________________, a Professional Land Surveyor, do hereby certify that the plat of _______________________________ is based upon an actual survey and subdivision of Section _____, Township _____, Range _____, that the distances, courses, and angles are shown thereon correctly and that monuments and lot corners have been set on the ground as shown on the plat.
________________________________________
(Surveyor's signature and seal)
(14) Acknowledged certificate of free consent executed by all parties having any interest in the lands being subdivided as shown by a current title report; and also, in the case of plats containing a dedication of roads, streets, or other areas, the dedication, waiver of claims for damages, and, if required, a waiver of direct access, all pursuant to RCW 58.17.165 and in a form substantially the same as specified by this section.
(15) If the subdivision lies wholly or in part in an irrigation district, a statement evidencing irrigation water right-of-way in substantially the following form:
The property described hereon is wholly or in part within the boundaries of the _________________________ Irrigation District and all lots within the short plat are subject to the terms, conditions, reservations and obligations in the present and future concerning irrigation water rights-of-way and easements as may be imposed by said district in accordance with the law.
(16) Dedication by the owner of streets, rights-of-way, easements, and any sites for private, semiprivate, or public use.
(17) The signature of the city public works director shall certify that the subdivision applicant has either:
(A) Completed all improvements in accordance with these regulations and with the action of the city council; or
(B) Submitted a bond or other method of security in accordance with the provisions of Section 10.50.016O sufficient to assure completion of all required improvements.
(18) A space for the signature of the administrator certifying that the final plat conforms to the conditions of approval for the preliminary plat. (Ord. 2173, § 2 (Exh. A), 2022.)